removing 65 Valiant Cowl

After studying my parts car and determining where the drains were located I was able to clean the ones in my '63 using the bent wire method mentioned by D33 above. They are high enough up and with the access available at the hood hinge hole they are not too hard to get to without removing the fenders.
Water flows freely now and not inside the car! :cheers:

Thanks for the assist! And to aid in others looking into this in the future I took a couple of pictures of the cowl drains on my parts car:

http://s38.photobucket.com/user/ToughOldFord/media/Tech/Mopar/65V100CowlDrainLS_zps9a03fd5a.jpg.html

http://s38.photobucket.com/user/ToughOldFord/media/Tech/Mopar/65V100CowlDrainRS_zpse53af860.jpg.html