Oops on the main cap torque

If you got them torqued down and the crank spins freely, then I wouldn't sweat it. It's not worth an extra clamp load cycle on them to retorque them unless it makes your crank tight.

The bolts have already stretched from that torque cycle, retorquing them will only stretch them more for the new torque cycle. I would let it go if the crank spins freely, it won't hurt.

As stated above, the extra torque will not affect bearing crush, just stretch the bolts slightly a little more.

If you are worried about it and want to retorque them for piece of mind, it us up to you. I would let it go myself.