help with carb options

I am building a 360 stroked to a 408 for a 66 Dart. 904 trans 3:91 gears. 10:1 pistons with .575 solid roller. I found an old edelbrock tunnel ram 2x4 setup that included 600 volleys. Came with kits to rebuild them so I took the first one apart and the carbs are in rough shape. Lots of old deposits from old fuel sitting and drying in them. I soaked them overnight and I plan on soda blasting them before I put them back together. The bowls have lost there glow as in the finish has come off. Not sure how they will work as they are probably 20+ years old. So if I have problems with them what brand / sizes of carbs are others using with similar setups. Also any suggestions with the carbs I have.
Thanks Rod