clutch fan too close for 3 row radiator on 360 engine
From a previous thread.. It was determined 1/2" clearance is adequate on another thread..
I went out to the car and took the fan
clutch off the car. I was then able to get a exact measurement from the front of the pulley to the radiator. 3-1/8". The Jag
clutch is 2.67" that only leaves me with .455" between that
clutch and the radiator. I still fear that, that is still to little of room.
http://www.forabodiesonly.com/mopar/showthread.php?t=270324&highlight=clutch
hope it helps