eBay - seller 11karkrazy complete front end suspension rebuild kit

I've used a set from him for my 66 dart. I did feel that the tie rod end sleeves were on the cheaper side, so I re-used the original sleeves. (later to be upgraded to the C body style of tierod and sleeves). I also went with the offset bushings. I mainly wanted to get the balljoints.

ball joint uppers = fair, they were stone b$tch to get all the way in. but they ARE tight
ball joint lowers felt tight and looked decently made.
tie rods= fair (but I'm changing out to the bigger ones later after I put 1k or so on the car)
sleeves= crap use originals of you can
sleeve lock downs = crap use originals if you can
bushings looked ok and fit well for use not super good quality but not as bad as some I have seen.
they pressed in nice and tight. then I remembered I wanted the offset bushings for more adjustment:banghead: