Expert needed for spring position

well so much for my grand plan , there's a nut on a bolt that centers in a hole in the shock plate as well so you can only use the center hole on the spring perch -Doh ! I'll be cutting some spacers out of some old power steering pump brackets because that is the only thick steel I have on hand , as for square well with the new wheel on that side there is 1/4 clearance to the spring at the back and the front of the tire is hard against the spring clamp so I would say there is at least 3/16" angle toward the driver in the front . I have 1 piece thats about a 1/4 and one thats about 3/16 so I'm going to cut and drill them for spacers and see what that does , maybe I'll make a couple of thinner pieces as well for tuning . The tire itself just clears the front of the wheel opening by 1/8 right now so I should be able to get it .Now to find small bolt pattern spacers and longer studs for the wheels .