Wiped a Cam Lobe. Total rebuild??

If you have it out and apart, refresh it. Rings, bearings, etc. Mancini has a good deal on a refresh kit with main & rod bearings, rings, and gaskets.

Cast iron rings:

http://chucker54.stores.yahoo.net/sealedpowerkit.html


Moly rings:

http://chucker54.stores.yahoo.net/sealpowkitb.html



I would also recommend cleaning out your oil passages to make sure there is no debris in there from when the lobe wiped out. At least pull the oil galley plugs and take it to a high pressure do it yourself car wash and blast all of the oil passages. (If you're not soaking wet when you finish, you didn't do it right. LOL!)