Mopar Performance SS Springs Installed Pictures Request on 64-66 Barracuda

Sorry, the springs on the 66 Barracuda are just rebuilt stock units. It is 21 1/2 inches from ground to rear wheel lip. On 70 Barracuda I never saw a height increase with SS springs on rear and normal daily driving, I did have to remove the rear sway bar, due to handling with SS springs. On 65 Coronet SS springs are installed, but not driven yet. No real height increase noticed. I did not measure before and after.
On 66 Barracuda it has a 8.8 rear end installed with 3.27 new posi from Summit and 31 spline axles, using 2 short side lengths. On long axle I had it cut down to short length, to keep axle twist in same life time direction. Only real issues were spring perches and axle mounts for 3 1/4 axle tubes. It has not been driven yet.