Time For a rebuild

Well not much been going on, busy with work and family. I have done the fuel lines and return lines. Have had another problem with the mm intake not their fault. I had the bungs drilled for the injectors and while i was setting up the fuel lines on the intake and rail hold downs the intake chipped where the intake runners and injector holes meet exposing the o-ring. I have taking the intake in to have the holes drilled and have new bungs installed. not sure I am going to use it now may just shelf it and use it when I build the stroker and use the factory intake on the engine with low boost. I did port the factory intake and am currently trying to figure out how to route the fuel lines to feed both rails and return both to the regulator. Will post some pics later, just thought I would stop by say hello and say I have not given up on the project. On a good note I did receive my new wheels and front tires.