lokar kickdown issues

You can use a mopar kick down cable kit and make a bracket for the carb using an off the shelf cable bracket and modifying it if you dont buy the complete kit. A throttle return spring bracket may also need to be made but can be done using old brackets or some bar stock, a drill and a file. Here is my set up with a 390.

Bracket if you don't buy the complete kit
http://shop.mr-gasket.com/throttle-cable-bracket-auto.html

Cable without hardware and carb bracket kit.

http://www.classicindustries.com/mopar/parts/mn2238.html

Cable with hardware and carb bracket kit. This is the kit with a hadware kit that also is needed. It has the lever arm that goes on the transmission, bolts and nuts and a return spring that also mounts on the transmission.

http://www.classicindustries.com/mopar/parts/mn2236.html


This is MOPAR stuff not aftermarket so you know it will work.