Ignition problems with pick up circuit

Then I apologize to you sir. I gave it serious thought before starting the new topic, and I know Xposting is a no-no; but I hoped that this heading would draw more comments, and adding the links to each one would not make it too irritating. Next time I won't do it ... if there is a next time. Thank you.

I am using the the original reluctor, and yes I am certain I installed it exactly as it came out.

yes, I replaced the pick up coil with a new NAPA part and I checked it against the original - it's a match.

As to the wiring being crossed - I'd never know, but the car runs the same as before I replaced the pick up coil.

As to phasing - one source states: "you need to turn just the cap or "bowl" like on a msd pro cap. don't turn the whole distributor, or timing will change. not all distibutors can be phased, as the cap can't be rotated independently."

On the Mopar distributors you can't do this. If it's off phase then it was when I bought it, new, as a 1992 Commando Crate 360/300.