Advice On Dual Turbo RB Stroker

http://www.theturboforums.com/

One thing I have learned form chatting with some very knowledgeable folks over there is not to buy into the low compression bs. Don't remember his name, but if you spend some time on YouTube looking for "Matt's Dart" you may find one very wild Dart. Has an aluminum blocked wedge with a big single. Pump gas, no inter-cooler......meth injection is being used as a charge cooler. Started out with a low compression build, believe it was 7.5:1 or so. Had a failure and rebuilt the block. Pushed the compression up to the 10:1 area....motor obviously ran better off boost....and made more power per pound of boost....on pump gas...than with the lower compression ratio...

http://www.youtube.com/results?search_query=matts+dart