Cold Valve Setting

IQ52 said

Well the Chilton manual will list the hot setting for the stock cam. Did you install a new stock cam or something else? If something other than stock, make sure you use the cam's correct lash settings, they may not be the same as the stock lash settings.

Click to expand...

The head is stock with new springs. The cam is new, but I don't recall seeing the cold lash setting on the cam card on anywhere else on the paperwork.
Something else was weird from Isky, the stock rocker shaft had metal shims between the rocker arms. But Isky sent me springs instead. Ever seen anything like that before ???

Still looking !!