Anybody running 17" Cobra Bullit rims on a Duster

I wouldn't necessarily pass on the 17's just because of the hub register and zerk. The 18" RPF1's on my Duster have a dropped center, so I still have to run a low profile zerk fitting on the upper ball joint. And, there's more aftermarket rims that won't fit over than hub on these cars than will. I also had to have the hub register on my RPF1's opened up at the machine shop to fit over the aluminum hub for Dr. Diff's 13" brake kit, and that hub is smaller than the stock rotors.

A lot of the aftermarket rims have a 73.1mm hub register, which is big enough to clear the hub, but then they neck down for a smaller wheel cap. Since a lot of designs don't have a really thick wheel center, the hub has to come all the way through the wheel. At least that's what I found with both my RPF1's and the Rota P45's I bought.