Help w/ Holley- stuck at work!

Hey, I have 2 390 Holleys on a tunnel ram, everything is new and has worked w/o any issues. Today, it sputtered and died on the way to work, but I made it by keeping the rpms up at stop lights, as it wanted to stall and was running rough.

The front carb saturated the carb gasket and was leaking gas out.
I thought the choke was stuck or something, it was not. Next I checked the idle air bleeds to see if they were clogged, nothing visible, and no other option, I took some of that dust off stuff and blew out the idle and high speed.

Cleaned off the gas, let is sit in the sun to evaporate any excess, set the chokes, (electric), and it started fine, then idled down and sputtered, leaked gas again, and died.

Is there anyone out there who can provide any insight so I can drive home?