degreeing a slant camshaft with no cam card
I'm working on it as I can. Putting it into a spread sheet. Trying to figure out how to make it easier to explain/understand without getting too confusing... :banghead:
Thanks very much, I did not think that you had forgotten about me. I am not in a rush but only wanted to make sure you had not given up on me. Yes the easiest the better. I am thickheaded.
I am still trying to figure things/ what I can out myself, trying to collect what info I can from some other people as well.
I called Erson cams tech guy, he is nice to talk with but he may or may not have the time/interest to help me to understand, only time will tell, still awaiting some reply that I am assuming I will get.
The tech guy at Comp cams was as rude/useless, would not give my questions a second thought.
I mention these things cause I want you to understand I am not just idly sitting by waiting for you to do something for me.
I am trying to help myself.
Someone recently told me that as you had mentioned the centerline method would work to tell me if my #1 intake valve was opening at the correct point.
Unfortunately although I have read much on the centerline method I cannot quite connect the dots on the procedure to make it work for me and give me the info I am after.
Hoping you can walk me thru all of this.
Thanks again