cam id

Geez a month ago you said you were takin it to the machine shop. Why would somebody with the same cam with the same part number be able to help unless they had a cam card? You cannot determine lift by measuring the entire lobe. You have to either install it in an engine and measure lift with a dial indicator, OR put the cam on V blocks and measure it with a dial indicator. Because cam manufacturers put the lobes anywhere on the cam core they want to, that is the only way. You've been given the instructions, now use them. Either measure it yourself or take it to a machine shop. Asking the question multiple times just because you don't like the answer and want a different one won't result in much.