1967 Cuda Notch 273 w/904

Right after I pulled the transmission, we decided to move. That put any major projects on hold for awhile. In the meantime I decided to tackle the steering column situation. The previous owner had swapped the column out for a manual column, and also had a manual steering box on it. This was for his 833 he planned on adding. He was going to add a floor shifter as well.

I decided to stick with the 904 and keep the shift stock on the column. Luckily the owner had the original column, so he threw that in the trunk for me. The only problem is that the automatic column doesn't jive with the manual box without an adapter. After some FABO help, I got the FirmFeel adapter. After install, it still wasn't bridging the gap. Several FABO members clued me in that the inner shaft had collapsed, which snapped the sheer pins. I pulled it back out, re-installed, and it fits fine.