megablower

This is how I would do it. Buy the ModMan with no plate. I'm not sure they offer it that way but you can try. Go to a machine shop and get them to make a plate that fits the intake and is big enough to mount the blower on. The fit on the intake is important. It must clear the dizzy and still seal on the intake. I would then take the intake and plate home and mount it on the engine to ensure proper fitment. Then I would set the mega blower on the plate and ensure clearance from the dizzy. Then I would mark on the plate where the blower bolt holes have to be. Then get the bolt holes drilled and tapped. You are all set to go. NOTTTTTT. Now you have to get a 90 degree adapter for the upper rad hose and figure out how to get the temp gauge sensor to work. These are just some of the problems you will encounter. Getting the proper fuel amount to the carbs is going to be your next chore.

Jack