hemidenny posted some pics in his thread before. contact him, he can tell you where the exact centerline of the crank should be in an abody so you will not be wondering later on about it.
engine offset should be 1 3/8" toward the passenger side, some might get by w/ 1 1/4".
measure from inside frame rails to center of crank snout. I set mine at 1 3/8', the TTI headers would not have gone in, if any differant, if I hadn`t. still had to loosen the steering column, and hold it over to the left and retighten it. other than doing it by myself, being 68 yrs. old, was way easier than putting them on the hemi used to be. the drivers side was *****, even in the b body!--------bob
