anyone running methanol injection?

no dont do that. that would suck all the water as it runs. but do put in above the carb. to much water will damage the engine. try to find some methanol. and start out putting in a small amount. if it was mine i would put on switch as a push button on the gear shift leaver. make a nozzle by using a small brass tube. solder one end closed with a small drilled hole. start at .020 then if more is needed go up in steps of .005 or .010. remember changing a .010 hole by .005 is a lot less than a .050 by .005 edit: if methanol is on fire it is hard to see in day light. but water will put it out.