Whats a good Remote Oil Filter Kit for 340/360?

This part is where the filter screws onto.

1st pic; You can see inside the "out" side that I opened it up.
2nd pic; You can see how I'm laying back on the shelf directly above the spot ground back. This "shelf" is like a set of Lego blocks. Straight, 90* turn to the side, 90* turn back up or out.

3rd pic; You can see just how far the oil passage can be opened up. Not much further though since that is where the oil filters "O" ring seals up.

What is hard to see is that in the center, it is also opened up a little bit.

Some ports can get a lot removed for smoother oil flow, some can not. Getting to crazy on it, you'll open up into the adjacent passage killing oil flow and pressure. Like when you leave the small plug out of the block when you do a rebuild.

So, I think spending a little time to help keep the oil flowing smooth and fast instead of crashing into walls and making 90* turns is well worth the time. Do not get to crazy on it because as always, once the metal is gone, it's gone.