5.9 With RPM intake and Serpentine

The main thing I was wondering about was the area under the AC compressor. The bypass hose looks like it would fit fine. From the pictures above it looks like stock routing. On the magnum, there is a pipe that extends out from the pump that I think is one side of the heater flow circuit. Where it comes in at would be at the front of the manifold, just before the thermostat. That would be if the pipe at the pump was an outlet and not an inlet. If the pump pipe is opposite it would be reversed. In any case, a picture of where the manifold is drilled to allow the heater to hook up would be the main picture I would need. Under the AC compressor is the only pic I am really wanting to know about at this second. Although some pics of the compressor routing to the condenser, and a condenser mounted on the core support pictures would be great.

My plans are to use as much underhood magnum AC and Serpentine stuff as possible. But most of that will be at a later date. I got to get the engine running and in the car first!