5.9 With RPM intake and Serpentine

Dragonbat13, mopardaddy, Getting to your posts, I did not mount the A/C compressor for use. Hooking it up requires a pipe fitter I guess you may say the title of the job is. Custom hose maker? There is a guy down the block from me that will do this, but I myself am not worried at this point. Like you said, I just wanna getter runnin.

I also have not run any hose's. There all the same size. On the drivers side of the water pump, the metal tube that can just be pulled out will just simple have the heater hose routed back to the passenger side in front of the engine. This makes the best sense really considering the Dodge truck has the route going up the drivers side.

Below is a shot that may only apply to my '79 Magnum "B" body. That would be lower radiator hos fitment. The fan is a bit bent up from a fender bender. The fan hits the hose. A little muscle and moving the hose around did the clearance trick,

Next is the OE air cleaner on top of the thick gasket and AVS Thunder carb, both from Edelbrock. I tried to use the '79 hose, it doesn't clear the best. The truck hose does better with the A/C installed.