5.9 With RPM intake and Serpentine

A few more air cleaner shots.

The first one is the MoPar chrome valve covers. The breather isin the middle of the cover and to connect it to the air cleaners tube, the hose needs to bend a little more than what you see, this is about the min. bend allowable. When it is like this, the cut out on the air cleaner for the A/C is at it's min. for clearance for the A/C's port on top of the pump.
(Bottom picture)

The hose seen in picture 2 is the truck hose. This gave better clearance than the OE '79 hose.

Back to the bottom picture. You can see the A/C's rear bracket. There is no provision to mount it directly to the intake like the stock set up does. What you need to do, if you so desire, is to find a bolt long enough and use a sleeve to create a sturdy mount. The sleave goes around the bolt under the bracket much like the alternator has bolt sleeves.