thoughts about 273er combo

hi folks,

as she is allready out or order, due to a broken driveshaft yoke, and it will take some time to get the spare parts, i decided to let the trans checked and revised by Mr.Shift aka as KickDown here on FABO.

Meanwhile i just want to up-date the family, and furthermore wanna ask for your suggestions conc. camshaft (maybe also a suggestion on numbers to order a custom made one)

current state:

- 273 .040 over
- CR 8.8:1
- Heads #920 with opened up runners to 340heads size, bowl blended, valve bosses grinded down, exhaust runners and combustion chamber polished
- Rockers stock hydro
- Valve springs compcams 901-16 (353lbs seat load 101 closed load 242)
- Headers (long tube custom made)
- intake LD340
- Intake OEM spread-bore 4bbl cast from an 1971 340engine
- Carb 850cfm Thermoquad
- stock 273 bottom end (crank, rods)
- Windage tray
- 9 quart deep oil pan
- Trans TF904 pushbutton with stock /6 converter
- Rear end 3,91 clutch-type
- Tires 26.1 hight

at the moment i run this mild cam (as mentioned in my first posting) ssi 11309 (lob 112, duration 050 lift 204-214, ad dur int.270 exh.280 Valve lift .420 .443)
some kind of nice cam, similar to a 340 cam as far as i know

now it´s up to the FABO members to give me some new suggestions/ideas
wanna get her into mid 14sec times