Flat towing 65 Barracuda

Pull the driveshaft before towing!!! To remove is easy - you remove the four bolts that hold the two U-shaped straps to the axle yoke. You'll need to have a box or a combination wrench. I believe they have 3/8" heads on the bolts, crawl under and check. Take them off, pull the driveshaft forward then down, then slide the driveshaft back out of the transmission. Put a baggie over the trans yoke to keep fluid from coming out as you tow the car. Also, bag the four bolts and two u-joint straps in a zip-lock bag so you so not lose them!!!

Installation is reverse.