275/60/15 mt drag radial fitment
29x14.5-14" Bias "Kelly Super Chargers" on my '73 340 Duster with Stock Tubs and Stock Spring Location. On 14x10" Keystone Klassics, with roughly 4.5" Backspacing and an A-Body 8.75" Rear (with aftermarket LBP axleshafts)
Edge of the tread is about flush with the outside edge of the quarter panel. Rubs a little on hard turns when you've got your foot jammed into the throttle.
A bit bigger in height and width than a 275/60/15. Though I ran a 275/60/14 on the rear of my '74 Duster for years. Stock Tubs, Stock Spring Location, on a set of 14x8" Keystone Klassics with Unknown Backspacing and no rubbing or fitment issues.
29x14.5-14" Bias "Kelly Super Chargers" on my '73 340 Duster with Stock Tubs and Stock Spring Location. On 14x10" Keystone Klassics, with roughly 4.5" Backspacing and an A-Body 8.75" Rear (with aftermarket LBP axleshafts)
Edge of the tread is about flush with the outside edge of the quarter panel. Rubs a little on hard turns when you've got your foot jammed into the throttle.
A bit bigger in height and width than a 275/60/15. Though I ran a 275/60/14 on the rear of my '74 Duster for years. Stock Tubs, Stock Spring Location, on a set of 14x8" Keystone Klassics with Unknown Backspacing and no rubbing or fitment issues.
