Need help adjusting-Ladder bars

Steve if you want to calm the leave down on that car loosen the rear shocks I'd try setting them about 3 clicks out leave the bars alone set the front shocks on 50/50 setting put the upper control arm limiter rubbers back in then go in the car and change the launch rpm setting from 3400 to 4800 this will make the car leave softer believe me I do know how to set that car up. the one thing guys don't understand is the lower you set your launch rpm the more the converter can flash or freewheel which in turn causes the converter to hit harder and the higher the launch rpm the lessor amount of freewheel in the converter causing the car to leave softer and just drive away . with all that said I would just try the launch rpm to start with and you may not have to change anything else . Att. playing with the bars and not knowing what you are doing could cause you problems as the car is set and goes straight it may change that if you start turning things and you don't want the car pushing one way or the other with the wheels up ! Just my two cents I know you don't have any use for me but I'm only trying to help you here okay good luck and I hope your enjoying the car Steve.