pushrod length ball to cup

Thanks guys this is exactly what I was looking for!
Also after going thru forum and reading opinions I went with Crane Gold rockers 1.6 ratio.

I also took a shot with pushrods and bought Crane 3/8" at 8.250" length. Hope to get my parts in 2 or 3 weeks... and hope all fits.

I did not want to take chances with stock shafts so I got a full setup from Crane including shafts, spacers, springs and all needed hardware from Crane. Also took one pack of shims from Hughes in case I need to bring the shaft up for better geometry.
Now what worries me is rockers/valve covers clearance. I have mopar performance aluminium valve covers, hope the rockers will fit under these nicely.
Any experiences with such combination?

Once I get all parts I will post pictures and info so next person hits the problem will have all the information.

In my case it will be change from 8.575 to 8.250 meaning .325" shorter pushrod.

Femtnmax in Your case about the 8.3 pushrod... Wasnt it 8.375"? This is somewhat stock size... In this case the length difference between stock and would be .275".

So .050 difference between what You got and what I got meaning more threads showing... Will know all once I get the parts. Waiting sucks ;-)