Need some advice with my piston swap.

RustyRatRod said

Make sure you look at the compression distance on those badger pistons versus the dished pistons. Most of the time, the compression distance on the flat tops is shorter, resulting in the same compression as the dish. You don't buy pistons based on looks.

Click to expand...

Really ? Crap I bought the Mahle pistons cause they looked so cute with the coating and all , the colour combo just looked so good had to have them . So far it's worked out well , 12,000 miles and I don't burn a drop of oil between changes , just checked the oil level and with 2500 miles level is still 1/16th of an inch from full mark and relatively clean .
Pulling the heads today , will take some pics , see how much wear or damage pistons /block have .