Engine and Trans removal together?

I do mine from the top almost every year now. Pull it all to do trans work as well. You can just tie or wire the headers to the inner fender, pull the distributer, front pulley , the starter, oil filter , pull the rad, drop the center link , you can get away with just the track bar but I found it easier to drop both the track bar and pitman arm and lay it on the ground with the tie rods still attached. I use an intake plate mounted to the carb mount and pick the front hole to get the weight towards the trans ... out she comes with trans and all . An extra hand is a bit easier if you don't want any scratches in the floor hump but it's easy alone after you do it once or twice..