[SOLD] '98 360 5.9 Magnum motor

-
Status
Not open for further replies.

roughidle

Super Platinum Member
Joined
Aug 7, 2011
Messages
799
Reaction score
25
Location
Pennsylvania
Rating - 100%
6   0   0
Contact seller
I've got a 360 magnum out of a 1998 ram 2500. The motor was disassembled four years ago or so when I bought it. I heard it run before it was pulled and it sounded good and had good oil pressure. You'll get everything throttle body to oil pan. I may have scrapped the water pump. I've even got the harness and the ecu. I also have a brand new set of injectors from Mancini to go with it. Pickup in Watsontown, PA. Price is $400. Injectors are worth half that. Block, heads, valve covers, rockers, intake, cam, crank, rods, pistons, oil pump and pickup, distributor, tc cover, tc and sprockets, balancer, etc. I believe I have all the bolts in a box marked.
 
Only disassembled for storage reasons. Aside from that it didn't need tore down. All sounded fine when I heard it run before the engine was pulled. Had good oil pressure. Didn't hear anything out of the ordinary. I also tore it down with the anticipation of building a stroker out of it, but I've since moved onto building a big block.
 
Where in PA are you? If you are somewhat close I may be interested. Should have read better. See your in Watsontown. Will have to look how close you are. John
 
Pm me your zip code so I can see how far you are. A magnum motor sounds like a good winter project.
 
If he doesn't have a flex I do. Came off a 2000 59. If I can help you make the sale, cudasean can have it for shipping cost
 
I don't have the flex for it....but it looks like sport74 should be able to help you out....^^^^

Thanks!
 
Status
Not open for further replies.
-
Back
Top