[WANTED] 10" Front brake drum or drums, with out or with hub

-
Status
Not open for further replies.
H

hoop

Well-Known Member
Joined
Jan 24, 2012
Messages
242
Reaction score
16
Location
Kentucky 40862
Rating - 100%
2   0   0
Contact seller
I'm needing passage side front brake drum for a 72 Dart, but if you have a set, I'll take both, if you have drum & hub steel together that would be good!
Max Dia. 10.090

Loc. Partridge, Ky
 
Looking for ones just like mine with inside lip the same!
 

Attachments

  • DSCN4521.jpg
    49.1 KB · Views: 283
I have some spare hubs--will have to double check on the mounting holes if you need, Lawrence
 

Attachments

  • dartsportstuff 041 (Large).jpg
    41 KB · Views: 189
I'm needing the right drum because something happen on mine, just sead with hub bacause if someone has stock Mopar ones steel swagged together, that would be better for me, but if not that's ok!
 
mobileparts said:
I have the Brake Drums Brand New -- But No Hubs ---
Traditionally, the Hubs have to be re-used.........
Click to expand...
Is the inside lip same as mine. most new ones you get online today they don't make the lip the same?...
but use to when you could get them at the auto parts they would give ya just what you need!
 
hoop said:
Is the inside lip same as mine. most new ones you get online today they don't make the lip the same?...
but use to when you could get them at the auto parts they would give ya just what you need!
Click to expand...

got factory ones 50. set plus shipping
 
Got one drum, but it did not work out for me, it resurfaced thicker on one side for some reason, so steel looking for a used drum!... only message me if you can send pics!
 
hoop said:
Got one drum, but it did not work out for me, it resurfaced thicker on one side for some reason, so steel looking for a used drum!... only message me if you can send pics!
Click to expand...

I have what you need. I haven't pulled the drums off yet. I can send pictures. I can machine these at my place of work and also measure them. PM me if interested. Thanks, Paul.
 
I have a complete set I just took off my Demon that look new with no rust and little wear complete with brake shoes. The Demon had been restored when I got it and was driven very little. These are ready to bolt on as is. I am installing a disc brake kit on the car now. I would take $100 plus shipping. I could get pictures to you later this evening if interested,
 
can you post a picture of the back side of the mounting area of the drum-- I have 2 styles of 10" sbp brake drums in my shed-- neither is on a hub-- also what diameter is the rear of your hub-- there are 2 sizes of these, Lawrence
 
Status
Not open for further replies.
-

Back
Top