Cuda REAR SHOCK MOUNTS??

Well you people were correct. I'm posting the pics for anyone else who might need the info. I even managed get some pics through the large semi-circular hole where the spare sits. I had never noticed the cut out even though I know the spare sits there. The factory even made a slight (smaller) cut out on the passenger side so the extension and socket would line up properly, I guess the way the car was designed they didn't need that small cut out on the driver's side. I tightened them both while I had my son outside to hold the narrow shouldered shock bolt on the underside of the car.I also noticed that the driver's side stud/bolt (under the car) had a very large washer on the stud but the passenger's side was missing the washer. I guess whoever replaced the shocks last time forgot the washer. If you don't put the large washer on there the rubber bushing on the shock will bite into the shouldered area on the stud and the shock will never properly tighten or last as long as it should.

Thanks again,Treblig