Torsion bar adjusters sticking way out of control arm?

Yes the motor and transmission are in. The car was assembled by a shop that had built several/many Mopars. It has also been to a front end alignment shop that is very well known among local Mopar guys and hot rodders. Then it went back to the machine shop that specializes in Mopars. I put about 10 miles on the car total over 3 different trips. The front brakes felt like they are sticking so I decided to start crawling around the car a bit. Found the torsion bar bolts looked unusual and the front brake hoses (stainless braided) look like they have been rubbing on the steering knuckle/linkage. I am surprised none of the a shops noticed or mentioned it?