66 dart electrical problems

pyrojim said
So I took another look at the 10 pin connector and sure enough, It matches the old harness, but not the new one. So, I pulled all the pins, matched by color according to the "real" manual and what do you know. Everything is working now except the flashers and one park light? Traced the flasher and definitely has power? So, all that being said, what the hell does this green light mean??

it (usually) means that one of your lights on the left side of the car is either bad or not getting a good ground. check the socket and ,,,ummm using a test light sort of poke it into the edge of the front parking light or socket flange to ground it to the housing. if it works then , it is a ground problem, you can solder it but you need a heavy duty soldering iron(like 67dart273 has in post 30 is best! (mines from the early 70's so I have no idea where you would actually get one like that now OR how much it'll cost!) to actually get it to solder to the housing. sand a spot off in the housing and socket for good joining. oh and see if you can find the pre-tinned paste to help adhere it to the steel. you have got to really heat it correctly and then tin it to get it to stick. remove or insulate the contacts for the bulbs so you don't cook the epoxy insulator for the contacts. dimpling the front sockets work for a bit bu usually will lose connection once weather/ corrosion get's back in there again.

Damn 67daart273 I LIKE that last one you posted a picture of. I used one a little bit smaller that that to spot repair tiny diesel radiators leaks when I was a kid. those suckers put out a ton of heat!