Correct Super Stock Seats?

This is a set of little red express or warlock seats that I have made to fold.
They are lighter than the SS seat frames.
I had to remove about a 2" section from them to get them the correct width.
I also removed about the same amount from the height.
They are now the correct size and I have modefied them to fold by cutting
and building the hinge pin arrangement shown.
I replace all the springs in all the frames with a heavier wire springs
and add extras as they are all very weak as far as car seats go.
This is my best attempt at having a seat that is impossible to find or very
expensive when or if you do find them.
When upholstery is on should be a very good copy that few could detect
from originals. Good enough for my cars anyway and better than what I have found on
the current market.
16 or 14 ga. steel frame 1969 A100 compared to the modified 78-79 express seat
which is built out of a lighter 20 ga sheet metal.


View attachment IMG_20141010_165754_501.jpg



View attachment IMG_20141010_165404_216.jpg