WTB Slant 6 power steering bracket
- Thread starter KENTON
- Start date
-
- Status
72swingerVA
Active Member
I've got a '73 Swinger /6 parts car - would that bracket fit your '64?
KENTON
Well-Known Member
I added more pictures of my pump, If your bracket looks like it will fit this pump PM me some pictures and a price. Thanks.
72swingerVA
Active Member
I'm at work now, it'll be dark before I get home, but I'll check it out tomorrow.
KENTON
Well-Known Member
I think the 66 would be as close as any thing. Just PM me pictures and a price.
That bracket looks like the one for a 65/66 slant factory AC-equipped car.
72swingerVA
Active Member
Checked mine on the '73, it looks like it's the same type of pump but the bracket is a little different (seems to have an extra tab with an unused bolt hole). I attached a couple pics, sorry for the poor quality.
gregpurcell
Greg Purcell
What you have is a TRW pump with the 6 cylinder bracket.
I have a Federal pump with the 6 cylinder brackets. The Federal brackets will not interchange with the TRW brackets because of the location of the rear mounting hole (see pic below). If you can't find the TRW 6 cylinder bracket, I can sell you my entire Federal pump and brackets (which came from a 67 Dart daily driver) for $50 shipped.
PM your email address if you need pics.
Good Luck!
I have a Federal pump with the 6 cylinder brackets. The Federal brackets will not interchange with the TRW brackets because of the location of the rear mounting hole (see pic below). If you can't find the TRW 6 cylinder bracket, I can sell you my entire Federal pump and brackets (which came from a 67 Dart daily driver) for $50 shipped.
PM your email address if you need pics.
Good Luck!
- Status
-
