Parting out Virginia 1965 Barracuda

-
Status
Not open for further replies.
P

pbiggs

Well-Known Member
Joined
Mar 5, 2008
Messages
532
Reaction score
95
Rating - 100%
6   0   0
Contact seller
I'm getting ready to move my 1965 Barracuda parts cars (what's left of it) to the recycler.
As you can see in the pictures, not much sheet metal worth a darn, but the original 273 engine minus the heads, 904 trans and 7 1/4" rear are intact. The console shifter is complete except for the shifter knob.
The standard steering and all front end parts are there.
Wiper motor and linkage present, but most of the dash components are gone.
Front seat frames seem good and the rear seats are probably useable as is with a good cleaning.
All glass is good except the windshield (original with markings) has some clouding around the edges.
Please PM me with any questions and I will work on pricing.
Car is located in Front Royal. VA 22630
 

Attachments

  • 65 Barr parts car ext1.jpg
    48.5 KB · Views: 527
  • 65 Barr parts car eng1.jpg
    54.1 KB · Views: 509
  • 65 Barr parts car ext2.jpg
    49.9 KB · Views: 531
  • 65 Barr parts car tran shifter.jpg
    48.1 KB · Views: 482
  • 65 Barr parts car int1.jpg
    58.1 KB · Views: 486
  • 65 Barr console shifter.jpg
    44.7 KB · Views: 498
Console ash tray..:)
Rear plastic corner trim (2) thats at base of back glass, interior.covers trim nut holes
Straight bar gas cap
 
What condition is the 5 piece trim that is between the rear window and deck lid? The price?


















?
 
pishta said:
Console ash tray..:)
Rear plastic corner trim (2) thats at base of back glass, interior.covers trim nut holes
Straight bar gas cap
Click to expand...

I was hoping someone might be interested in the complete shift mechanism with cables, mounting bracket and the console cover. Are you asking for the ash tray insert itself or the complete console cover?
I have tried unsuccessfully on two of my Barracudas to get the plastic covers off and they always break apart. I will take a closer look at these on the car and let you know.
The gas cap is a chrome aftermarket .
 
Bob Creighton said:
What condition is the 5 piece trim that is between the rear window and deck lid? The price?


















?
Click to expand...
The rear trunk moldings have heavy pitting and one of the side pieces has a broken edge...I don't consider them sellable. Sorry
 
is the radiator basically a core? Price with local pick-up (I'm in Strasburg).
 
IN need of the straps that hold the rear seat in the down position and the caps that go over the brackets when the rear seat is in the upright position.
Thanks Bill
 
65 Dartman said:
is the radiator basically a core? Price with local pick-up (I'm in Strasburg).
Click to expand...

Hi..I would say the radiator is a core because I have not had it checked. The radiator in the car is part number 2785973 which is original for a 1967 A-body w/273 AT.
But if you are still interested, I would like $50 for it.
Thanks, Pat
 
ptbill said:
IN need of the straps that hold the rear seat in the down position and the caps that go over the brackets when the rear seat is in the upright position.
Thanks Bill
Click to expand...

The straps are black and the chrome is fair. $10 for the pair.
Not sure what bracket caps you are referring to. Covers for the seat bar latches mounted on the side of the wheel well?
Thanks, Pat
 
Steering colum (sorry No Tiny Spell) if it is not sold allready :D I don't need the wheel Pat.
 
Hi Pat Will take the straps and yes those are the covers. Let me know how you want the payment. Will also take the covers if you have them.
Thanks Bill
 
Hi Pat Will take the straps and yes those are the covers I need. Let me know how much both if you have straps and covers and how you want payment.
Thanks Bill
 
memike said:
Steering colum (sorry No Tiny Spell) if it is not sold allready :D I don't need the wheel Pat.
Click to expand...

Golly....I'd love to sell the steering column to you for $50, but shipping it will be that much and more probably. I have no idea how much it weighs for a shipping estimate.
Has anyone ever shipping a steering column?
Thanks, Pat
 
You could take the column apart, and ship the upper pieces in small flat rate box, and then get one of those mailing tubes to ship the rest of it in. Since I came up with that brilliant idea....will you sell me the back glass and gasket cheap? LOL. I'd have to see if I could get my buddy to stop by and pick it up on his way to WV.
 
How bad is the left quarter panel, outer wheelhouse, and trunk extension? I see some rust - could you get me some better clearer pics?
 
JDMopar said:
You could take the column apart, and ship the upper pieces in small flat rate box, and then get one of those mailing tubes to ship the rest of it in. Since I came up with that brilliant idea....will you sell me the back glass and gasket cheap? LOL. I'd have to see if I could get my buddy to stop by and pick it up on his way to WV.
Click to expand...

Well I'm not sure your shipping suggestions will result in a lower total shipping cost, non the less I will offer you a deal on the rear window and gasket. I'm thinking $75 for both, with a condition that your buddy pull the window when he/she gets here. If $75 sounds too steep, feel free to shot me an offer..I may decline the offer because I do have two driving early Barracudas and the extra rear window may someday be cheap insurance for the unexpected.
Thanks, Pat
 
pbiggs said:
Golly....I'd love to sell the steering column to you for $50, but shipping it will be that much and more probably. I have no idea how much it weighs for a shipping estimate.
Has anyone ever shipping a steering column?
Thanks, Pat
Click to expand...

Hi there...I did pull the steering column out today. If you are still interested, I will try to get a shipping quote.
Thanks, Pat
 
Status
Not open for further replies.
-

Back
Top