front disk brakes

I used the SSBC A153 kit and it worked well for me. It is an improvement over the drums but was not a dramatic improvement. I do notice a lot less brake fade though. SSBC bought the Kelsey Hayes design and the calipers are very similar if not identical to the 4 piston type used on 70-72 small bolt pattern hub. I wanted to keep the small bolt pattern but can convert to big bolt if I decide to later. It was relatively easy to do and I learned a lot about bleeding a master cylinder and brake lines which I had never done before. I tried to use the little plastic tubes that came with the kit to bleed the master but found it more efficient to use metal brake lines with fittings and curve them into the bowls of the Master. I had to pump the master about 100 times before all the bubbles were gone. I bought a motive power bleeder from summit and bled all four wheels 2 times and it was good. I am still learning auto mechanics at 62 yrs old and enjoy improving my skills.