Pump to Carb Hard Lines

krazykuda said

Looks good.

It's hard to see some of the clearances there. If you don't have at least 1/2" clearance around the line to the alt bracket, you may want to put something in between the line and the bracket and tie wrap it to the alt bracket. Vibration can cause a "sawing" action and eventually rub through the line if there is not enough clearance.

Click to expand...

I don't have 1/2" but there is definitely clearance everywhere. The pictures make it look like it's touching, but it's not. The lines are pretty stiff so I don't think I will have a problem, but I'll definitely check for signs of contact after the maiden voyage.

The Toyota Tundra has a bracket mounted to the frame rail that holds this filter. I guess you could grab one from a salvage yard and modify it to mount to the intake manifold, but not sure how that would look.