340 to 372 c.i.

With a 3.58 stroke, you would basically need common flattop 360 pistons, which tend to be around 1.66"-1.67" compression height. Just gotta find the right bore starting at 4.04". But if you don't want to deck the block a bit, it may involve custom pistons and more expense. I believe KB 107's go to 4.08" bore.

In the '70's, Tom Hoover (father of the Hemi) built a budget 360 + .060" which ended up at 371 or 372. He used low compression 340 pistons but had to mill the tops down and clearance the bottoms under the wrist pin bosses for the counterweights. That was before there was a variety of 360 pistons to choose from.