Performer RPM intake?
well one option i may have to go with is a 2" high air filter with one of those fancy filter tops
according to the calc on their site, i need
400 cid X 6000 (max rpm) / 20,839
or 115 square inches
for a 2" high X 14" diameter filter, the area is
determined by multiplying the diameter of the filter times Pi (3.1416) times the height of the air filter in inches, then subtracting .75-inch. We subtract .75-inch to compensate for the rubber seals on each end of the element and the filter material near them since very little air flows through this area.
so that is 14 X 3.14 X 1.25 or = 55 sq in
so if i use the fancy lid, 14" that will give me (i'm calcing off 13" not counting the edge part) another 3.14 X 6.5 X 6.5 or another 133 sq inches
so i will have a total of 188 square inches even if i just use a 2" filter if i get the fancy top, i get way more square inches than i need
how's that for a sledge hammer lol
i really dont want a hood scoop. they look cool but this car will be driven and i dont want water problems