Upper ball joint socket

-
C

cudafstbk

Member
Joined
Jan 25, 2011
Messages
10
Reaction score
0
Location
Kittanning Pa
Hi Guys...what size socket do I need for the upper BJ on my 69 Cuda? Any tips on where I can pick one up...Thanks...John
 
I had a seldom more likely never used 1-7/8" 12 point socket that I took a die grinder to 4 of the points about a 1/4" down.
 
I've seen poor boys in the hood use a pipe wrench....(but yes I have both sizes)
 
Hey, what's wrong with the pipe wrench?
I seem to remember doing that once or twice...
Hey, it was a long time ago, really!
(and welding them after install because the thread was almost nonexistent)
And how many of us are going to do it THAT often?
 
There was a thread a couple months ago with a $10 socket
I'll bump it up for you

:burnout:
 
Dave...your the man...Thank You. I Have a 3/4" drive set that I rarely use and the 1 7/8 is there. Thanks again...to all you Guys on here. What a great site!
 
To the top, I thought this was some good info.
 
You must log in or register to reply here.
-

Back
Top