Wheel hub sources?

Stop! Wait! Hold On! Please read the message from Brian (bcschief) before you proceed. Quite a bit has been written about it. I wanted to replace the LH studs with RH studs and my brake guy pounded it out and enlarged the hole and the new stud won't fit tightly. I think he only did this on one hole. I found a used hub/drum at the junk yard with RH threads. It cost $70. It was pretty dirty and had some rust. I hope it will clean up and be usable.

Also read RustyRatRod's response. There is a good article on this subject on the 62to65mopar site.