More Sideways than forward..

famous bob

okay this is not for everyone. You can take a set of small block truck pancake motor mounts and burn out the center in a trash barrel etc.We put wire on each stud and hung it in the barrel until rubber melted off. one half bolts to a B body motor mount steel. other half to K frame.This is with a small block k frame never tried it on anything else. you now can shim the motor up and down until you get it where you want it using different thicknesses of metal. This is how we made BB mounts when we were kids. If you simply welded the two mount halves together without the rubber you would drop motor 1/2 of a inch. using spacers you would drop it another 1/2. this might offset your raised port heads. we would get everything level and shimmed up then tack it all together. removed tacked up mounts and weld solid. No conversion mounts back then and it works. no idea on hedder fitment as we were using fenderwell hedders