100 horse shot of nos for 440?

hey I just saw this popped up had no idea it was mine until about half way through. but at any rate, since I have four years more knowledge at this point and have done some 1/4 mile runs with it I think I have some more intelligible comments.

motor is the same, going to rebuild this winter. 440 .030 over, stock rotating assembly real close to 10.5:1 with the heads I have on it now. I was running a dual plane edelbrock performer when I ran 11.64 all motor. Im thinking ill run a single plane with a rpm range between about 1500-6000. I don't intend to ever rev over 6000, while shifting at 5500. I have a NOS brand 125 plate kit Im going to run in the spring with a freshened motor and tubeless slicks. I'd be hopeful of a possible 10.40 pass. I have never had experience with nitrous before hand, so to be safe I think ill retard the timing from 35* total to 30*, and go through my carb too. I was not planning on running a stand alone fuel system for it, just tapping into the 110 from my cell. I have a high flow mechanical pump now, rated at 125 gph. I will be adding a holley electrical pump for added insurance, and I think around 14 psi of fuel pressure of the line.

car traps now at 5200 going through at 116.4. im hoping I can spray without over revving through the trap. I run 3.55 gears now but have a set of 3.23s if testing proves that I need less gear.

if anyone has any good input for me i'd appreciate it. more so now that im actually sure what I want to do with my car and im not a 16 year old with a hundred different thoughts on possible builds lol.