71 4dr Dart 318 w 4bbl

exhaust is dual. just a home job hack together by apearence. will replace with a better set up. ill look into the Summitt/Jeggs. Thnx.

On the cam; i can certainly save my pennies and buy a new. Before that, is there a way to tell if a used cam is bad? things to look for? no sense buying a new if this comp cam was only run for a short time... right?
As for the duration numbers. what should i look for?
My Comp Cam is 1200-5200rpm has 212/212 with 110 seperation

The Lunati Voodoo 1000-55000rpm has: 213/220? with 112 of seperation. This sounds like what your suggesting. Summitt has a kit, comes with lifeters not timing chain.


the lifters from what i read create a wear pattern with cam lobes. So they should be replaced with a new cam. is your recomendation another set over the Rhodes or not to replace at all?
use the set with a cam kit if i dont use the cam i have?

Anything else to consider (other needed parts) in a gear swap... or buy 3.23s? What is the stock 1971 Dart classic 4door rear end: 8.75 or 8.25??
I do not see any in summit catalog for reference do you have a suggestion here?

Electronic Ignition recomendations?

Again thanks all for the starter help!