First start up of 572

410 gears. 8 3/4 489. Cope Racing built 727. Forward manual valve body. Cope TC 3000-3800.
I ported and polished the heads and intake. gasket matched intake and exhaust ports. It has 9.6 to 1 compression

I installed an Ohio Crank 572 kit.
These are the specs:
4340 4.5" stroke 8 bolt crankshaft
JE Custom flat-top pistons
OC 7.1" H-beam rods w/ARP 2000 bolts
Total Seal rings FM race bearings
Internally Balanced

Hears the cam kit I'm running.
RPM Range: 2600 - 6600
Lift with 1.6 Rocker: .560"/.565"
Duration @ .050": 243/251
Advertised Duration: 294/302
LSA/IAC: 110/106
Valve Lash: Hyd/Hyd
Cam & Lifter Kit: 20230713LK
Complete Kit: 20230713K
Lifters: 72338-16
Springs: 73121-16
Retainers: 75748-16
Locks: 77127-16
Valve Spring Kit: 73121K5
Valve Seals: 78505-16
Timing Set: 94225
Pushrods:
Rocker Arms: 85370-16

This is the first Auto trans hot rod I've ever built. Lost my left leg below the knee, last year. No biggie, just can't shift the 833s anymore. At 67 yo, this will most likely be my last build.